B- CIOKS 2200 Flex Adapter

$6.75

By using two isolated outlets the Flex Series adapter gives you the sum of the voltages of the two outlets used.  This Flex adapter cable should be used in combination with any of CIOKS standard FLEX cables if you want to power an 18V, 24V or even a 40V pedal.  It gives you not only the higher voltage but also the possibility to choose the type of plug at the pedal end plus the length you need.  The plug type and length is determined by the standard FLEX cable used with the FLEX adapter.  If you’re looking for a simpler way to power an 18V pedal with a standard 5,5/2,1mm centre negative DC plug (Boss standard) please have a look at CIOKS Stack Flex.

Please note that the FLEX Series adapter makes a series connection of the two outlets used.  These two outlets must be isolated from each other.  You get the sum of voltages (V) and not the current (mA).  If you use it with two 9V outlets with a 100mA rating each you’ll get 18V and still a maximum current of 100mA.  If you use it with two 9V outlets with 200mA each you’ll get 18V and a maximum of 200mA.  If you use it with two outlets rated to a maximum 200mA set to 12V you’ll get 24V and still a maximum of 200mA.

Be careful when using the Series Flex adapter.  There is a risk of damaging one of your 9V pedals by powering it with too high a voltage.  Check the specifications of the pedal and if you still have some questions you’re welcome to send an email to support@cioks.com for useful information.

1 in stock

SKU: CIOKS 2200 Category: Tags: , , ,

Reviews

There are no reviews yet.

Be the first to review “B- CIOKS 2200 Flex Adapter”

Your email address will not be published. Required fields are marked *